Skip to content
Overview Path 7

Overview Path 7

TV Series Transformers

TV Series Transformers are high-quality isolation and autotransformers. They are fully compatible with Aerotech’s drive systems that require separate transformers.

Have questions? Contact an Aerotech expert.

Description

Specifications

Dimensions

Downloads

Description

Path 7

Description

Specifications

Dimensions

Downloads

Description

Design Features

  • High-quality isolation transformer
  • Fully compatible with Aerotech's drive systems that require separate transformers
  • Conservatively rated, open-frame units with mounting brackets and screw terminals or flying leads for easy installation

TV Series Transformers Specifications

Model
Units
TV1.5
TV2.5
TV5
TV0.3-28
TV0.3-28-56-ST
TV0.3-56
TV0.5-28-56
Type Type Isolation Isolation Isolation Isolation Isolation Isolation Isolation
Rating kVA 1.5 2.5 5 0.3 0.3 0.3 0.5
Inputs VAC 104, 115, 208, 230 104, 115, 208, 230 104, 115, 208, 230 100, 115, 200, 230 100, 115, 200, 230 100, 115, 200, 230 100, 115, 200, 230
Terminals Screw-type pressure lugs Screw-type pressure lugs Screw-type pressure lugs Flying leads Screw Type Screw Type Flying Leads Screw Type Flying Leads
Weight kg (lb) 17 (38) 23 (51) 35 (78) 3.6 (8) 4.7 (10.4) 3.6 (8) 4.9 (10.7)
Outputs VAC 28, 43, 56, 70, 115 28, 43, 56, 70, 115 28, 43, 56, 70, 115 28 28, 56 56 28, 56

Dimensions

TV Series Transformers



Ordering Information

TV Transformers Data Sheet TV0.3-28-56-ST Hardware Manual TV0.3-28 Hardware Manual TV0.3-56 Hardware Manual

Related Products

MFM Motor Filter Module

The MFM noise filter module is used to reduce conducted line noise generated by PWM (Pulse Width Modulation) switching servo amplifiers. The MFM is used with any Aerotech PWM amplifier to reduce output switching noise from these amplifiers. When used in tandem with the UFM input power filter, conducted PWM amplifier noise is significantly reduced.

View

UFM Noise Filter Module

Aerotech's UFM noise filter module is used to reduce conducted line noise generated by switching servo amplifiers. The UFM is used with any BA series amplifier to conform to CE noise directives.

View

Automation1 XC4e Enhanced, PWM Servo Drive

The XC4e PWM digital drive is an enhanced single-axis motor drive designed for ultra-precise motion control applications. 

View

Automation1 XC4 PWM Servo Drive

The XC4 PWM digital drive is a single-axis motor drive designed for precision motion control applications. All versions communicate to Automation1 PC- and drive-based controller products over the HyperWire® motion bus. The amplifiers control brushless DC, brush DC, voice coil and stepper motor types at up to 340 VDC operating voltage and 30 A peak current capability.

View

Ndrive HPe High-Performance PWM Digital Drive

Not recommended for new designs. See the new Automation1 XC6e. The Ndrive® family of digital servo amplifiers are high performance discrete drives used with the A3200 motion controller. These drives are capable of controlling brushless, DC brush and stepper motors over a wide range of operating voltages and currents. The Ndrive HPe is the highest-performance PWM drive providing a host of features not available on the other PWM drives, and is available in output current ranges from 50 A to 200 A peak.

View