GalvoCFC – Galvo Calibration File Converter

Built for power and ease of use, the Automation1 Motion Development Kit (MDK) is the most user-friendly interface available for industry-leading precision motion control.

Our Automation1 Software-Based Machine Controller (iSMC) tightly integrates precision motion with process control.

Automation1 GL4 2-Axis Linear Servo Drive

The Automation1 GL4 is a high-performance, closed loop 2-axis linear servo drive for controlling our AGV laser scan heads. With an effective scanning resolution of greater than 24-bit and advanced features like Infinite Field of View (IFOV), Position Synchronized Output (PSO) and Enhanced Scanner Control (ESC), the GL4 stands out as a superior scan head drive solution for your most demanding high-precision applications.

A high-performance linear amplifier for single-phase motors, the XL4s digital drive eliminates non-linearities common to PWM amplifiers. It offers deterministic behavior, auto-identification and easy software setup. Advanced features—including full state feed-forward, 200 kHz servo rates and look-ahead-based velocity control—allow you to achieve industry-leading settling times, long-term thermal stability and sub-micron-level tracking accuracy.

Thanks to an industry-leading servo rate of 200 kHz, you’ll see better tracking performance and part quality at high speeds in applications such as fast-tool servos, high-dynamic optical focusing axes and high-speed pick-and-place machines

The AGV-HPO two-axis laser scan head uses low inertia motors and mirrors with dual digital encoders for near-zero velocity and position tracking error. Its open housing design ensures low mass and a small installation footprint. Thermal drift performance is optimized via optional closed circuit water cooling for motors and the scanner housing. Optional forced-air mirror cooling increases laser power handling, allowing the AGV-HPO to maintain high precision for the most demanding laser processes. When calibrated via standard mark and measure procedures, the AGV-HPO provides valuable insight to path following error before a part is ever cut. High-reflectivity mirror coatings enable adequate power handling for both CW and pulsed laser applications.

Aerotech’s AGV-SPO single pivot-point galvanometer scanner provides an alternative to traditional two-mirror galvo scanners. Derived from the popular AGV-HPO scanner, the AGV-SPO enables a larger field of view and reduced spot distortion for critical laser micromachining applications.

CADFusion programming software lowers implementation risk and ensures the best performance and accuracy possible with Automation1 and A3200 controllers. It delivers dramatic improvements in part quality and throughput that wouldn’t be possible with third-party CAD cam software.